 |
| The CPAPDRYER cleans, clears and dries the six foot CPAP tubing used for CPAP machines. This simple product lessens the chance of bacteria buildup in your CPAP tube and can clear out just about all types of debris.
Directions:
- Detach both ends of flex tubing from headgear and machine
- Hold one end of tubing higher than your head with one hand, then drop the non lead sinker into tube with the other hand.
- Feed line into tube until sinker comes out the bottom opening
- Push approximately 25 - 50% of the cloth into the tube opening. Then pull the cloth through the tube by pulling on the sinker.
- Now repeat the process pulling the cloth through the tube from the opposite direction.
- Hang the CPAPDRYER and flex tube up to dry
- You may also wrap the CPAPDRYER around the card as shipped to help prevent tangling of the line when not in use.
- If knots in the line become loose, use pliers to pull them back tight
|
|
|
