Sandman Auto Respironics CPAP Machines & Masks ResMed CPAP Masks & Machines Puritan Bennett CPAP Equipment S8 Escape II
View CartMy Account / Order StatusHelp

3/26/08 - Mirage Micro Design...

3/7/08 - CPAP Mask Insurance...

1/12/08 - ResMed S8 II CPAP...

11/28/07 - EncoreViewer 1.0...

11/14/07 - CPAP Tubing Wrap...

10/24/07 - Breathing New Life...

9/24/07 - Mirage Quattro Design...

8/05/07 - Battery Powered CPAP...

7/22/07 - Where's my REMstar...

7/16/07 - Is CPAP Pressure...

(Your shopping cart is empty)

  Home > CPAP Parts > Mask Parts >

  Forehead Support without Pad for Mirage Activa and Ultra Mirage Nasal Mask
  Mirage Activa Forehead Support
Mirage Activa Forehead Support
 
Price Guarantee!

Our Price: $15.00

Insurance Code: E1399
Manufacturer: ResMed


Product Code: 60122
Qty:


Description More Information
 
The forehead support for the ResMed Mirage Activa is the "t-bar" without a forehead pad. This forehead support is designed specifically for the ResMed Mirage Activa and the ResMed Ultra Mirage Series II nasal masks and is not compatible with other ResMed Masks. This nasal mask component differs from the forehead support for the ResMed Ultra Mirage Full Face mask. This forehead support does not have channels for headgear release clips (or quick clips), whereas the forehead support for the ResMed Ultra Mirage Full Face mask requires these clips to secure the headgear to the mask. With this forehead support, the headgear straps are simply inserted into the slots near the outer edges of the cross member and are secured using velcro. If you'd prefer to use a forehead support with headgear release clips you can opt for the forehead support for the Ultra Mirage Full Face mask. The supports are interchangeable between the three masks with the only difference being the headgear (i.e. headstrap) attachment.

Forehead supports can be used with nasal masks to reduce pressure points on the face. One common pressure point is the bridge of the nose. If you feel discomfort on the bridge of your nose while wearing your Mirage Activa nasal mask, then increase the angle of the forehead support to move the mask away from the bridge of your nose.

 
Features
  • pushbutton design allows for easy adjustment
  • designed for Mirage Activa nasal mask only
  • forehead pads are easy to install
  • designed to reduce pressure points on your face

Average Customer Review: Based on 1 Reviews. Write a review.

Related Products...
Mirage Activa Nasal Mask
Our Price: $145.00
Add
Mirage Activa Nasal Mask
Activa and Ultra Mirage Forehead Pad
Our Price: $12.00
Add
Activa and Ultra Mirage Forehead Pad


  0 of 0 people found the following review helpful:
 
Uses different pads than Ultra Mirage II July 30, 2007
Reviewer: Kevin Davis from Beaverton, OR United States  
Well, yes, you CAN use this tbar in replacement of the tbar on your Ultra Mirage II, but the pads are different.  Don't make the mistake of ordering the tbar without the pads.  At 3 am when the tension of your old tbar gives out, you won't be able to use the same pads (the ones that slip into teeth on each end).  The pad for this appears to push into round holes.  I'll know for sure when I get the pads.  For now, a little duct tape holds my tbar angle at the right place.

Was this review helpful to you?


Browse for more products in the same category as this item:

CPAP Parts > Mask Parts
CPAP Parts
CPAP-Supply.com
4720 E. Willow Springs Rd.
Spokane, WA 99223
 About Us
 Privacy Policy
 Send Us Feedback