Performance
Maximum heater plate temperature: 185F (85C)
Temperature cut-out: 199F (93C)
Maximum output humidity: 95% relative humidity (control dial set to maximum setting, flow rate 50 L/min, ambient temperature of 68F (20C), ambient relative humidity of 40%).
Dimesnions (H x W x D) (chamber and docking station)
4.6" x 6.7" x 8.3" (118 mm x 164 mm x 145 mm)
Weight
Docking station and unfilled water chamber: 670 g (1.5 lb). Water capacity to maximum fill line: 385 mL
Power supply input range
100-240V, 50/60Hz; 110V, 400Hz; 2.5A < 140 VA (110 W) (maximum power consumption). Instantaneous peak power consumption < 340 VA. Actual average power consumption will vary, depending on factors such as temperature setting, set pressure, the us eo faccessories, height above seal level, and ambient temperature. Maximum heater element power: 85 W.
Housing construction
Docking station: Flame retardant engineering thermoplastic, plated cast aluminum.
Water chamber: Injection molded plastic, stainless steel.
Environmental condtions
Operating temperature: +41F to +104F
Operating humidity: 10-95% non-condensing
Storage and transport temperature: -4F to +140F
Storage and transport humidity: 10-95% non-condensing
IEC 60601-1 classification
Class II (double insulation)
Type CF
Electromagnetic compatibility
Product complies with all applicable electromagnetic compatibility requirements (EMC) according to IEC60601-1-2, for residential, commercial and light industry environments.
* Consult the medical department of the carrier before using on aircraft.
Note: The manufacturer reserves the right to change these specifications without notice. |
