Sleep8 CPAP Sanitizing Companion
Subject to Availability. Please Call 1-888-955-2727 for Availability.
Compatible with all CPAP machines and accessories. Rechargeable battery.
Sleep8 is a portable, virtually silent device that santizes all CPAP machines and accessories - getting germs out, and keeping wellness in. Sleep8's Activated Oxygen System provides complete, waterless, chemical-free cleaning.
The Sleep8 CPAP Sanitizing Companion complete kit is all you need to sanitize any CPAP, APAP or BIPAP device including all accessories like tubing and water chamber. There are no special adapters required. Just follow the simple instructions and let the cleaning begin.
Cleaning is simple and convenient, with three basic steps:
Step One: Unplug your hose from your CPAP device and plug it into the universal port inside the bag.
Step Two: Close the bag with your mask and hose inside.
Step Three: Plug the Sleep8 device into the port on the outside of the cleaning bag and press the button on the Sleep8
Device cleaning time is one hour, and the device will turn itself off when the sanitizing process is complete. It is recommended to keep the cleaning bag closed for an additional hour after the cleaning cycle has finished to allow the ozone to dissipate and convert back to regular oxygen. Total cleaning time is two hours including this waiting period.
Clean with One Click
Just press start and Sleep8 will do the rest. Once your CPAP and accessories are fully sanitized, it automatically turns off.
In 60 minutes, Sleep8 will have your CPAP completely sanitized using Sleep8's waterless Activated Oxygen System.
With a rechargeable battery, Sleep8 is small enough to take on-the-go.
Sleep8 kills more than 99% of bacteria that may lead to mold, sinus issues, and sickness.
Sanitizes all CPAP machines, plus masks, heated and non-heated tubign, and water chambers.
Multiple Users - No Problem
Any number of CPAP users in a household can use the same Sleep8, either separately or simultaneously. It's possible for two masks and two tubes to fit inside the bag (although this does depend on the size of the masks and the length of the tubes), and anything inside the bag will be sanitized with ozone. Keep in mind that when people use the CPAP sanitizer separately at different times, the full two-hour cycle needs to finish before the next person uses the Sleep8. The bag should not be opened until the complete two-hour cycle is finished. Note that the first hour is sanitizing, and the second hour is filtration and conversion of ozone back to oxygen. When the Sleep8 device gives the okay, then you can open the bag and start it again with the next set of equipment.
Sleep8 does not cut corners on safety. It uses multiple one-way flapper valves to ensure that all of the ozone it generates actually goes into the cleaning bag. Sleep8 incorporates a safety shut-off that prevents the unit from running in the event that the Sleep8 is connected to the cleaning bag improperly. Even the charging port on the Sleep8 is sealed to prevent ozone leakage. The only way for the air in the bag to leave the closed cleaning bag is through a large carbon filter. The filter converts ozone back to oxygen, rendering it safe.